By sticking to the theme held by The 9th China Kunshan Die & Mould Industry Forum and depending on the featured advantages of die and mould industry in Kunshan National High-tech Zone, The 10th China Kunshan Die & Mould Industry Forum is to push forward the reformation of manufacturing industry in terms of its production, management and marketing mode by concentrating on the new techniques, new formats and new modes resulted in by internet; The 10th China Kunshan Die & Mould Industry Forum will push forward the intelligent manufacturing and manufacturing innovation; due to the digital manufacture caused by internet, it will also benefit the knowledge sharing, economic sharing and innovation; then it will enhance the value chain and expand the industrial chain; finally, it will bring out a conversion from production-oriented manufacturing to technical service-oriented manufacturing and it will deepen the intelligent development of die and mould industry and establish a cooperation platform for technical integration. Firmly scratching the opportunities made by FADMA OBM 2017 held in Kunshan, The 10th China Kunshan Die & Mould Industry Forum will enlarge its international cooperation in capacity and consolidate the ecosphere of die and mould industry in Kunshan; besides, The 10th China Kunshan Die & Mould Industry Forum will push forward the intelligent manufacturing and benefit the manufacturing industry in China to be top in the whole world.

 

Internet + Intelligent Manufacturing of Die & Mould Industry and Asia Die & Mould Ecosphere Construction

 

Sponsor: CDMIA (China Die & Mould Industry Association), Kunshan National High-tech Zone 

Organizer: High-tech Industrial Zone EDB (Economic Development Board), Kunshan Die & Mould Industry Association

 

Leaders from Kunshan Municipal Party Committee and Kunshan Municipal Government; leaders from Kunshan National High-tech Zone Party Working Committee and Kunshan National High-tech Zone Administration Committee; major leaders of CDMIA; leaders from Kunshan’s functional departments; leaders from functional departments of Kunshan High-tech Zone; leaders from die and mould associations in Jiangsu, Zhejiang and Shanghai.

 

Oct. 25 ~ 26, 2017

 

Oct. 25, 2017, a. m.: FADMA OBM 2017 (Conference Room 833)

p.m.: visit relatedenterprises in Kunshan

 

Oct. 26, 2017 a.m.: Internet + Die & Mould Intelligent Manufacturing and Asia Die & Mould Ecosphere Construction Summit

p.m.: die and mould collaborative manufacturing ecosphere docking meeting

Venue: Kunshan Crown International Exhibition Hotel   Kunshan Hall (3)

 

 

Representative of the FADMA OBM 2017 check in;

FADMA OBM 2017 :  by CDMIA，leaders from Kunshan High-tech Zone and EBD will give welcome speeches;

 

 

 

Host: Kong Weihua, a member of Kunshan High-tech Zone Party Working Committee and vice director of Kunshan High-tech Zone Administrative Committee

 

8:30 - 9:00 Major leaders of Kunshan Municipal Government and major leaders of Kunshan High-tech Zone meet the academicians and all members of Federation of Asia Die & Mould Association;

 

9:00 - 9:05 speech made by leaders from Kunshan Municipal Government;

9:06 - 9:10 speech made by CDMIA;

1) Die & Mould Intelligent Manufacturing and Integrated Manufacturing

Speaker: Guo Chongqing (academician), professor of Tongji University and deputy director of Department of Engineering Management of Chinese Academy of Engineering

2) Development and Application of AI in Injection Moulding

Speaker: Li Dequn (academician), professor of Huazhong University of Science and Technology and academician of Chinese Academy of Engineering

3) Intelligence and Refining of Die and Mould Manufacturing in Japan

Speaker: Chairman of Japan Die & Mould Industry Association  

4)Intelligent of the Korea Mold Manufacturing

Speaker: Doctor Huh Young Mu (Chairman of Korea Die & Mould Engineering Association)      

 

 

Host: Qin Ke, secretary general of CDMIA

1)  Scale: die and mould enterprises in Kunshan and some backbone die and mould enterprises in Jiangsu Province, about 200 - 250 enterprises in total;

2) Purchasers: about 20 ~ 25 purchasers are invited, including the enterprises and purchasers from Japan, Korea and Singapore, who have investments in China and attend the meeting of FADMA;

Class A: automotive OEMs, automotive components and automotive electronics;

Class B: IT/IC precise electronic products, home appliances and electrical products;

Class C: medical machines.

 

Die & Mould collaborative manufacturing ecosphere docking meeting: figure out and scratch the trend of die and mould manufacturing in Asia and push forward the international cooperation in capacity.

 

 

The propaganda and promotion proposal is to be defined by the summit, which is to be carried out via CDMIA, Jiangsu Die & Mould Industry Association, Kunshan Die & Mould Industry Association and magazines specializing in die and mould; one month before the summit, propaganda is to be done via a series of websites specializing in die and mould industry (www.mould.net.cn, www.KSMOULD.com and Mobao); live broadcast will be done on the Wechat Platform and advertising videos will be played via streaming media. Anyway, the propaganda shall be widely carried out.

 

 

In order to better prepare and manage the "The 10th China (Kunshan) Die & Mould Industry Forum and Internet + Die & Mould Intelligent Manufacturing and Asia Die & Mould Ecosphere Construction Summit", a team leading the preparation work is established.

 

Team leader: Kong Weihua, a member of Kunshan High-tech Zone Party Working Committee and vice director of Kunshan High-tech Zone Administrative Committee

Qin Ke, secretary general of CDMIA

 

Deputy team leader: Wang Zhigang, director of Kunshan High-tech Zone Office of Party and Government Affairs

Sun Jianbo, director of Kunshan High-tech Zone EDB

Lu Chunming, director of Kunshan High-tech Zone Social Affairs Board

Zhou Zhifu, vice president of CDMIA

 

Team members: Bao Jinbei, deputy director of Kunshan High-tech Office of Party and Government Affairs

Tan Songsong, deputy director of Kunshan High-tech Zone Office of Party and Government Affairs

Wang Qing, deputy director of Kunshan High-tech Zone Investment Inviting Bureau

Liu Qingtao, deputy director of Kunshan High-tech Zone EDB

Tang Jie, deputy director of Kunshan High-tech Zone Technology Division

Jing Xingliang, deputy director of Kunshan High-tech Zone Social Affairs Bureau

Mao Tianyao, chief of Economic Department of Kunshan High-tech Zone Office of Taiwan Affairs

 

Under the leadership of the team, there are some other groups, including Comprehensive Affair Group, Conference Affair Group, Propaganda Group and Guarantee Group. Here below are their organizations and responsibilities:

 

 

Group leader: Sun Jianbo

Vice group leader: Bao Jinbei, Liu Qingtao, Guo Ziying

Group member: Lu Jianfeng, Shen Huifeng

(1) Mainly responsible for the plan-making and coordination work of the summit (charged by Liu Qingtao while coordinated by Lu Jianfeng);

(2) Invite superior leaders (leaders from Kunshan Municipal Party Committee, Kunshan Municipal Government and other departments, charged by Bao Jinbei;

(3) Leaders from CDMIA and die and mould industry associations in Jiangsu, Zhejiang and Shanghai is charged by Guo Ziying);

(4) Draft the leader’s speeches (charged by Tan Songsong); collect and review the speech materials of the guests (charged by Lu Jianfeng while coordinated by Shen Huifeng).

 

Group leader: Zhou Zhifu

Vice group leader: Wang Luhua, Wang Qing, Mao Tianyao

Group member: Shen Guoqiang, Zou Huifang, Wang Meihuan, Crown Hotel, Longying Advertising, Gu Yingxiao, Ou Sainan

 

(1) Pick-up: guests and speakers attending FADMA (charged by Wang Luhua);

 

(2) Mainly responsible for the work related to speakers, present enterprises and purchasers (4 speakers addressing in the morning are to be charged by Wang Luhua; for the 200 enterprises engaging in mould and machines, 150 of which are charged by Wang Luhua, 20 are charged by Wang Qing, 20 are charged by Mao Tianyao and 10 are charged by Zou Huifang);

(3) In the afternoon, 20-25 enterprises attend the procurement meeting, of which 10 are charged by CDMIA, 5 are charged by Jiangsu Die & Mould Industry Association, 5 are charged by Kunshan Die & Mould Industry Association and 5 are charged by Shen Guoqiang;

(4) In the afternoon, 200 - 250 enterprises attend the procurement-supply docking meeting (charged by Kunshan Die & Mould Industry Association);

(5) The site arrangement (charged by Longying Advertising);

 

(6) Invitations, reception work, dinning, meeting materials and meeting documentation are charged by Gu Yingxiao, Ou Sainan and Crown Hotel;

 

(7) Activity planning, site arrangement and operation are charged by Longying Advertising;

 

Attendee (enterprises and guests) list shall be summed up by Gu Yingxiao (18912690867; xxddqq1019@126.com).

 

 

Group leader: Gong Yiyi

Vice group leader: Jin Yan, Tang Jie, Wang Luhua

Group member: Ding Yu, Lu Jianfeng

Mainly responsible for inviting medias, propagandizing the summit and delivering information (professional medias are charged by Wang Luhua, Party-government medias are charged by Jin Yan; coordinated by Ding Yu and Lu Jianfeng).

 

 

Group leader: Lu Chunming

 

Vice Group leader: Jing Xingliang, Wu Xianping

 

Group member: Kunshan High-tech Zone Administrative Committee, Chengxi Police Office, Yushan Traffic Police Detachment, Crown Hotel

(1) Make the security pre-proposal (charged by Jing Xingliang);

(2) Manage the environment around the activity site (charged by Kunshan High-tech Administrative Committee);

(3) Insure the traffic order ( charged by Yushan Traffic Police Detachment);

(4) Security of attendees on site (charged by Chengxi Police Office);

(5) Sanitation and security of the foods provided by the hotel (charged by Wu Xianping and Crown Hotel).